Home care and care services
Home care optimisation: more client time with the same staff
Shifts, client visits and routes affect each other, yet they are usually planned separately. Allocator calculates them as one plan, and team leads review the proposal before it goes into use. Allocator doesn’t replace your current systems. It works as an optimisation layer on top of them.
- Home care
- Home nursing
- Personal assistance
30 minutes, no commitment.
Tuesday · 4 nurses · joint plan
What does home care optimisation mean?
Home care optimisation means planning shifts, client visits and driving routes together, by calculation, so that more of the working day is spent with clients. It takes into account visit time windows, skill requirements, working-time rules and familiar nurses, among other things. Dynamik Allocator makes a proposal, and the planner approves it.
Building a shift roster and drawing routes on a map each solve only part of the problem. Optimisation solves the parts together, because each one changes the others.
What Allocator takes into account
Client
Visits and how long they take, time windows, service needs, familiar nurses
Employee
Availability, skills and qualifications, employment contract, workload
Rules
Working-time rules, collective agreement terms, rest periods and breaks
Place and time
Where employees and clients are, travel times, sick leave and changes during the day
One change knocks over the whole day’s plan
A home care day is built from three parts, and each one depends on the part before it.
- Roster: who is working, and when.
- Visit allocation: who takes which client’s visit.
- Routes: the order the nurse drives to the visits in.
The parts are usually done one after another, often in different tools and by different people. If a shift changes, the visit allocation changes, and then the routes have to be redrawn as well.
Changes happen every day. A nurse calls in sick, a visit runs long, a new client is discharged from hospital or a client moves their appointment.
1 · Roster
2 · Visit list
3 · Routes
Three separate parts, done one after another
Joint plan
Shifts, visits and routes line up in one plan
The morning rush and travel
According to a report by THL, the Finnish Institute for Health and Welfare, the morning is the busiest time in home care. The report says that moving tasks to other times of day has worked well, and that route planning matters a great deal in home care.
The familiar nurse easily falls out of the plan
THL notes that resource management in care management systems is often based on large areas. The risk is that one client is visited by many different employees.
Staff feel the rush
In THL’s staff survey (2015–2016), more than half of home care respondents said that fairly or very often they only had time for the essential tasks.
Source: THL, report 16/2018 (data 2015–2016). More on the sources in What the research says and doesn’t.
Shifts, visits and routes as one plan
When the three plans are made one after another, each step locks in something the next one can no longer change. Once the roster is done, visits can’t be placed so that fewer shifts are needed. Once the routes are drawn, the familiar nurse may not fit on the route.
Allocator solves them together. It looks for a plan in which shifts, employees, visits and routes fit each other and the rules it has been given. There are far too many combinations to compare by hand, so the calculation is done by computer. The planner makes the decision.
Visit timing and shift demand
Many visits are agreed for a time window rather than to the minute. When visits are timed within their windows so that the morning rush evens out, the same workload can be covered with fewer overlapping shifts.
Text alternative
| Time | Visits | Nurses |
|---|---|---|
| 6:00 | 2 | 1 |
| 7:00 | 8 | 4 |
| 8:00 | 14 | 7 |
| 9:00 | 10 | 5 |
| 10:00 | 6 | 3 |
| 11:00 | 4 | 2 |
| 12:00 | 5 | 3 |
| 13:00 | 4 | 2 |
| 14:00 | 3 | 2 |
| 15:00 | 3 | 2 |
| 16:00 | 2 | 1 |
| 17:00 | 1 | 1 |
| 6:00 | 3 | 2 |
| 7:00 | 8 | 4 |
| 8:00 | 10 | 5 |
| 9:00 | 10 | 5 |
| 10:00 | 9 | 5 |
| 11:00 | 7 | 4 |
| 12:00 | 6 | 3 |
| 13:00 | 4 | 2 |
| 14:00 | 3 | 2 |
| 15:00 | 1 | 1 |
| 16:00 | 1 | 1 |
| 17:00 | 0 | 0 |
Traditional planning and AI-based optimisation
Traditional
AI-based optimisation
| What is planned | Traditional planning | AI-based optimisation |
|---|---|---|
| Shifts | The roster is made first, and the visits are placed inside it. | Shifts and visits are calculated together, so shifts can be fitted to how many visits there are and when. |
| Visit allocation | The planner allocates visits from experience and memory. | Allocator proposes an allocation based on time windows, skills, locations and continuity. The planner approves or changes it. |
| Routes | The route follows from the allocation, by hand or in a separate tool. | The route is calculated in the same run as the allocation, so travel already counts when a visit is assigned. |
| Changes during the day | The change is made by hand, and its effect on other visits only shows later. | A new proposal is run for the change, and its effect on other visits is visible before anyone approves it. |
| Skill requirements | Qualifications are checked from what the planner knows. | The skill requirement is a condition of the visit, and the proposal is built around it. |
| Staff workload | Whether it is even is judged by eye. | An even workload is one of the goals the proposal weighs. |
Want to see what a joint plan looks like with your own visits?
A familiar nurse and the right skills for every visit
Continuity of care matters to clients, but it is hard to hold on to in the plan when visits are moved around by hand.
In Allocator, familiar nurses are one of the planning weights. When a visit is assigned, the proposal can favour a nurse who already visits that client. It also checks that whoever makes the visit has the skill or qualification the visit needs.
Workload is balanced in the same calculation. If the same nurse keeps getting the longest routes or the heaviest days, the plan doesn’t work, however few kilometres it has.
Visit proposal
- Skill requirement met
- Nurse has visited this client before
- Travel time from the previous visit 6 min
- Time window holds
Shifts are filled to match real demand
Allocator works out from the visits how many shifts of each type the work needs. It fills the shifts according to the collective agreement and makes sure every visit has someone with the required qualification.
Hours are filled in this order:
- Salaried staff: their contracted hours go first.
- Hourly contracts: the remaining demand is covered with agreed hours.
- On-call staff: only at the end, if demand still isn’t met.
Scope: Shift optimisation doesn’t replace your current rostering or care management system. It works on top of them as an optimisation layer. The rules are configured to match your agreements, and the final check stays with team leads.
Hours needed today · example 120 h
What is taken into account when shifts are filled
Collective agreement and working time
Collective agreement terms, rest periods and contracted hours are rules the proposal is checked against.
Qualifications
Every visit has someone with the skill or qualification it needs.
Absences
Holidays, sick leave and other absences are included from the moment shifts are filled.
Day-off requests
Employees’ day-off requests are taken into account when demand allows.
What the planner notices
Planning takes less time
The proposal arrives ready, so nobody has to build the roster by hand from scratch.
The work gets easier
The planner doesn’t have to keep every rule, request and absence in their head. They review the proposal and approve it.
Fewer mistakes
Every proposal is checked against the rules before it is published.
When someone calls in sick in the morning
At 7:10, a nurse with eleven visits planned for the day calls in sick. Each visit has its own time window.
When the absence is recorded, Allocator shows which visits are left with no one to make them and calculates a new proposal for the whole team. The proposal weighs the same things as the original plan: time windows, skills, travel and familiar nurses. Team leads see which of the other nurses’ days change, and can approve the proposal, change it or run a new one.
Wednesday · 4 nurses · 7:00–15:30
The proposal doesn’t put itself into effect. The planner decides what to take from it. If not every visit can be made at the agreed time, the proposal shows which ones are left unassigned.
Where working time goes and what optimisation can change
A home care nurse’s day is split between time with clients, travel, waiting, breaks and other work. Optimisation doesn’t add hours to the day. What it can do is move some of the time spent travelling and waiting to time with clients.
An example day, before and after
What the demo compares
In the demo, your current plan and an optimised proposal are calculated side by side from the same data. The comparison covers time with clients, travel time and kilometres driven, waiting time between visits, the number of shifts needed, overtime and how evenly the workload is spread. The result depends on how much slack your current plan has, and it may be small.
For the management view, see Allocator for leadership.
See the comparison with your own data
Home care, home nursing and personal assistance
The same principles work for planning three kinds of mobile client work. The emphasis is different in each.
Home care
Regular visits to the same clients, often in agreed time windows and many of them in the morning. Planning gives weight to the morning rush, the familiar nurse and travel time between visits.
Home nursing
Visits usually need nursing skills, and how long they take depends on the procedure. Planning gives weight to the qualification requirement, the time a procedure needs and visits that can’t be moved freely.
Personal assistance services
The work is often longer shifts built around the client’s daily life, and who the assistant is matters to the client. Planning gives weight to continuity, the client’s wishes and working-time rules.
Works alongside your current system
Home care usually already runs on a care management system that holds the visits, client records and documentation. Allocator doesn’t replace it. It works as an optimisation layer, and team leads approve its proposals.
What input data is needed
Visit locations, durations and time windows, skill requirements, employee availability, contracts and rules, and who visits which client. Optimisation doesn’t need care records or clinical data.
How a proposal is made
- The input data is brought into Allocator.
- Allocator calculates shifts, visits and routes as one plan.
- Team leads review the proposal, change it if needed and approve it.
- The approved plan goes back into use. How it is exported is agreed system by system.
Getting started
You can start with files, without an integration project. An API integration is possible, and how to build it is worked out one system at a time. We don’t name individual care management systems here, because compatibility is confirmed customer by customer. A pilot can be limited to one team or area.
What the research says and doesn’t
The home care problems this page describes come from a report by THL, the Finnish Institute for Health and Welfare, and from international literature reviews. They describe the sector, not Allocator results.
| Source | What it tells us |
|---|---|
| THL, report 16/2018, Finland, data 2015–2016 | Home care staff felt rushed and often only had time for the essential tasks. THL points out the risk that large planning areas pose to continuity of care. The morning is the busiest time. |
| Literature reviews: Cissé et al. 2017, Euchi et al. 2022, Atta et al. 2025 | Planning nurses’ shifts and visit routes is a well-studied problem internationally. |
Questions about home care optimisation
What does home care optimisation mean?
Home care optimisation means planning shifts, client visits and driving routes together, by calculation. The aim is for more of the staff’s working time to be spent with clients and less on travel or waiting. It takes into account visit time windows, skill requirements, working-time rules and continuity of care, among other things. The planner reviews the proposal and approves it.
How can AI make home care shift planning more efficient?
AI can build a shift proposal from the rules and needs it is given: employment contracts, working-time rules, skills and the number of visits. In home care the benefit comes from fitting shifts to when the visits happen. The planner decides what to take from the proposal and checks the roster before it is published.
Can AI optimise shifts and client visits together?
Yes. Allocator calculates shifts, client visits and routes as one plan, so visit timing and shift demand already affect each other in the calculation. Both shift and visit optimisation are in production use, but an implementation can involve customer-specific limits and configuration, which are agreed before go-live.
How can home care increase direct client time?
The share of client work grows when less time goes on travel, waiting and duplicated planning. In practice, visits are placed so that routes get shorter, the morning rush evens out within time windows and absences are handled without rebuilding the whole day by hand. Organisations define client time differently, so for a comparison it is worth agreeing first what counts.
How does route optimisation affect home care costs?
Route optimisation affects costs through travel time and kilometres driven. Travel time is paid working time, but it isn’t work done with a client. How big the effect is depends on geography, the number of visits and how planning is done today, and there is no general figure for it. Dynamik doesn’t promise a savings percentage. The comparison is calculated from the customer’s own data.
How does shift planning take staff skills and the collective agreement into account?
Skills and qualifications are requirements of a visit, and the proposal is built so that whoever makes the visit has the required skill. Employment contracts, working-time rules, rest periods and collective agreement terms are given to Allocator as rules the proposal is checked against. The rules are configured to match the organisation’s own agreements, and the final check and the responsibility stay with team leads. Allocator doesn’t guarantee that every situation complies with the collective agreement automatically.
Can optimisation be introduced alongside the current care management system?
Yes. Allocator works as an optimisation layer and doesn’t replace your current care management system. You can start with files, and an API integration is possible. Compatibility with specific care systems is checked customer by customer, not assumed in advance.
How does home care optimisation take familiar nurses into account?
Continuity of care is one of the planning weights. When a visit is assigned, the proposal can favour a nurse who already visits that client, as long as time windows, skills and working-time rules allow it. Continuity is a goal rather than an absolute rule: when someone is absent, the same nurse isn’t always available.
How can optimisation help when staff call in sick?
When an absence is recorded, Allocator shows which visits are left unassigned and calculates a new proposal. The proposal follows the same constraints as the original plan, and team leads see how the other nurses’ days change. Team leads approve, change or reject the proposal. If not every visit can be made at the agreed time, the proposal shows which ones are left unassigned.
One plan for the whole home care day
In the demo we walk through how Allocator works and compare your current plan with an optimised proposal, using anonymised sample data. 30 minutes, no commitment.
See also: Shift optimisation · Allocator for leadership · Pricing